Ink/Toner Finder
0
SharkBite

SharkBite 1 In. Push-to-Connect Brass Repair Coupling

Category Brass Coupling
 
C
 
C
461912 461912
461912 461912
461912 461912
SharkBite

SharkBite 1 In. Push-to-Connect Brass Repair Coupling

Item Code: 461912
Category Brass Coupling
  • A Disconnect Clip (included) or Disconnect Tongs (not included) are required to use this product.
  • Keep on hand for an emergency freeze or repair.
  • Compatible with copper and CPVC pipe only.
  • No special tools, crimping, glue or soldering is needed.
  • Can be installed in wet lines.
  • Rated for 200 psi and 200F (93C).
Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair. Disconnected Clip is included with the fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Weight

1.75lb

Height

10.8in

Width

6.25in

Length

4.8in

Brand

SharkBite

Category

Brass Coupling

Connection Type 1

Push

Connection Type 2

Push

Fitting Size 1

1 in.

Fitting Size 2

1 in.

Material

Brass

Maximum Working Temperature (F)

200

Pressure Rating (psi)

200

Size

1 in.

Type

Push

Call to order - 800.427.1704
Add to favorites
Compare
SharkBite

SharkBite 1 In. Push-to-Connect Brass Repair Coupling

Category Brass Coupling
 
C
 
C
461912 461912
461912 461912
461912 461912
SharkBite

SharkBite 1 In. Push-to-Connect Brass Repair Coupling

Item Code: 461912
Category Brass Coupling
  • A Disconnect Clip (included) or Disconnect Tongs (not included) are required to use this product.
  • Keep on hand for an emergency freeze or repair.
  • Compatible with copper and CPVC pipe only.
  • No special tools, crimping, glue or soldering is needed.
  • Can be installed in wet lines.
  • Rated for 200 psi and 200F (93C).
Call to order - 800.427.1704
Add to favorites
Compare
Slip couplings are the most efficient way to repair a burst pipe or leak. A slip fitting does the job of two couplings and extra pipe. Only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. The fittings are then released using a disconnect tool and slide back onto the other end of the pipe for a successful connection and leak repair. Disconnected Clip is included with the fitting. UPC, IAPMO, and NSF-61 certified and approved. The fitting should be used with copper only and is rated at 200 F., 200 P.S.I. It is made of 1-piece DZR brass. Fittings can be buried and placed behind drywall. Fittings are removable and reuseable. Product is individually bagged. Manufactured to include no more than 0.25% weighted average lead content on wetted surfaces.
Weight

1.75lb

Height

10.8in

Width

6.25in

Length

4.8in

Brand

SharkBite

Category

Brass Coupling

Connection Type 1

Push

Connection Type 2

Push

Fitting Size 1

1 in.

Fitting Size 2

1 in.

Material

Brass

Maximum Working Temperature (F)

200

Pressure Rating (psi)

200

Size

1 in.

Type

Push

SEARCH ×