Ink/Toner Finder
0
General Tools

General Tools 1/4 In. to 5/8 In. Spring Tube Bender

Category Tube Bender
 
C
 
C
320420
General Tools

General Tools 1/4 In. to 5/8 In. Spring Tube Bender

Item Code: 320420
Category Tube Bender
  • Easily make bends of thin wall or soft materials, such as copper and stainless steel
  • Make bends up to 180 degrees without crimping or collapsing the pipe
  • Made from oil hardened and tempered spring steel with a zinc-plated finish
  • Use one bender over the tube and an additional bender inside the tube
  • For tubes with the following (OD): 1/4 In., 5/16 In., 3/8 In., 7/16 In., 1/2 In., 5/8 In. tubes.
S106 Steel Spring Tubing Bender set Easily make bends of thin wall or soft materials, such as copper and stainless steel. Slide this spring tool over your tubing while bending to eliminate crimping and collapsing of copper and other thin wall tubing. We recommend using one bender over the tube and an additional bender inside the tube to achieve the best results. The benders are made from oil hardened and tempered spring steel with a zinc-plated finish. The 6-piece set works with (OD): 1/4 In., 5/16 In., 3/8 In., 7/16 In., 1/2 In., 5/8 In. tubes.
Weight

1.05lb

Height

13in

Width

0.5in

Length

3in

Brand

General Tools

Category

Tube Bender

Diameter

1/4 In. to 5/8 In.

Call for Availability
Add to favorites
Compare
General Tools

General Tools 1/4 In. to 5/8 In. Spring Tube Bender

Category Tube Bender
 
C
 
C
320420
General Tools

General Tools 1/4 In. to 5/8 In. Spring Tube Bender

Item Code: 320420
Category Tube Bender
  • Easily make bends of thin wall or soft materials, such as copper and stainless steel
  • Make bends up to 180 degrees without crimping or collapsing the pipe
  • Made from oil hardened and tempered spring steel with a zinc-plated finish
  • Use one bender over the tube and an additional bender inside the tube
  • For tubes with the following (OD): 1/4 In., 5/16 In., 3/8 In., 7/16 In., 1/2 In., 5/8 In. tubes.
Call for Availability
Add to favorites
Compare
S106 Steel Spring Tubing Bender set Easily make bends of thin wall or soft materials, such as copper and stainless steel. Slide this spring tool over your tubing while bending to eliminate crimping and collapsing of copper and other thin wall tubing. We recommend using one bender over the tube and an additional bender inside the tube to achieve the best results. The benders are made from oil hardened and tempered spring steel with a zinc-plated finish. The 6-piece set works with (OD): 1/4 In., 5/16 In., 3/8 In., 7/16 In., 1/2 In., 5/8 In. tubes.
Weight

1.05lb

Height

13in

Width

0.5in

Length

3in

Brand

General Tools

Category

Tube Bender

Diameter

1/4 In. to 5/8 In.

SEARCH ×